- Generated on Tue Jul 24 2012 16:16:32 for Contiki 2.6 by
1.7.3
|
Contiki 2.6
|
Defines | |
| #define | NIC_BSR (LANC111_BASE_ADDR + 0x0E) |
| Bank select register. | |
| #define | NIC_TCR (LANC111_BASE_ADDR + 0x00) |
| Bank 0 - Transmit control register. | |
| #define | TCR_SWFDUP 0x8000 |
| #define | TCR_EPH_LOOP 0x2000 |
| #define | TCR_STP_SQET 0x1000 |
| #define | TCR_FDUPLX 0x0800 |
| #define | TCR_MON_CSN 0x0400 |
| #define | TCR_NOCRC 0x0100 |
| #define | TCR_PAD_EN 0x0080 |
| #define | TCR_FORCOL 0x0004 |
| #define | TCR_LOOP 0x0002 |
| #define | TCR_TXENA 0x0001 |
| #define | NIC_EPHSR (LANC111_BASE_ADDR + 0x02) |
| Bank 0 - EPH status register. | |
| #define | NIC_RCR (LANC111_BASE_ADDR + 0x04) |
| Bank 0 - Receive control register. | |
| #define | RCR_SOFT_RST 0x8000 |
| #define | RCR_FILT_CAR 0x4000 |
| #define | RCR_ABORT_ENB 0x2000 |
| #define | RCR_STRIP_CRC 0x0200 |
| #define | RCR_RXEN 0x0100 |
| #define | RCR_ALMUL 0x0004 |
| #define | RCR_PRMS 0x0002 |
| #define | RCR_RX_ABORT 0x0001 |
| #define | NIC_ECR (LANC111_BASE_ADDR + 0x06) |
| Bank 0 - Counter register. | |
| #define | NIC_MIR (LANC111_BASE_ADDR + 0x08) |
| Bank 0 - Memory information register. | |
| #define | NIC_RPCR (LANC111_BASE_ADDR + 0x0A) |
| Bank 0 - Receive / PHY control register. | |
| #define | RPCR_SPEED 0x2000 |
| #define | RPCR_DPLX 0x1000 |
| #define | RPCR_ANEG 0x0800 |
| #define | RPCR_LEDA_PAT 0x0000 |
| #define | RPCR_LEDB_PAT 0x0010 |
| #define | NIC_CR (LANC111_BASE_ADDR + 0x00) |
| Bank 1 - Configuration register. | |
| #define | CR_EPH_EN 0x8000 |
| #define | NIC_BAR (LANC111_BASE_ADDR + 0x02) |
| Bank 1 - Base address register. | |
| #define | NIC_IAR (LANC111_BASE_ADDR + 0x04) |
| Bank 1 - Individual address register. | |
| #define | NIC_GPR (LANC111_BASE_ADDR + 0x0A) |
| Bank 1 - General purpose register. | |
| #define | NIC_CTR (LANC111_BASE_ADDR + 0x0C) |
| Bank 1 - Control register. | |
| #define | CTR_RCV_BAD 0x4000 |
| #define | CTR_AUTO_RELEASE 0x0800 |
| #define | NIC_MMUCR (LANC111_BASE_ADDR + 0x00) |
| Bank 2 - MMU command register. | |
| #define | NIC_PNR (LANC111_BASE_ADDR + 0x02) |
| Bank 2 - Packet number register. | |
| #define | NIC_ARR (LANC111_BASE_ADDR + 0x03) |
| Bank 2 - Allocation result register. | |
| #define | NIC_FIFO (LANC111_BASE_ADDR + 0x04) |
| Bank 2 - FIFO ports register. | |
| #define | NIC_PTR (LANC111_BASE_ADDR + 0x06) |
| Bank 2 - Pointer register. | |
| #define | NIC_DATA (LANC111_BASE_ADDR + 0x08) |
| Bank 2 - Data register. | |
| #define | NIC_IST (LANC111_BASE_ADDR + 0x0C) |
| Bank 2 - Interrupt status register. | |
| #define | NIC_ACK (LANC111_BASE_ADDR + 0x0C) |
| Bank 2 - Interrupt acknowledge register. | |
| #define | NIC_MSK (LANC111_BASE_ADDR + 0x0D) |
| Bank 2 - Interrupt mask register. | |
| #define | INT_MD 0x80 |
| #define | INT_ERCV 0x40 |
| #define | INT_EPH 0x20 |
| #define | INT_RX_OVRN 0x10 |
| #define | INT_ALLOC 0x08 |
| #define | INT_TX_EMPTY 0x04 |
| #define | INT_TX 0x02 |
| #define | INT_RCV 0x01 |
| #define | NIC_MT (LANC111_BASE_ADDR + 0x00) |
| Bank 3 - Multicast table register. | |
| #define | NIC_MGMT (LANC111_BASE_ADDR + 0x08) |
| Bank 3 - Management interface register. | |
| #define | MGMT_MDOE 0x08 |
| #define | MGMT_MCLK 0x04 |
| #define | MGMT_MDI 0x02 |
| #define | MGMT_MDO 0x01 |
| #define | NIC_REV (LANC111_BASE_ADDR + 0x0A) |
| Bank 3 - Revision register. | |
| #define | NIC_ERCV (LANC111_BASE_ADDR + 0x0C) |
| Bank 3 - Early RCV register. | |
| #define | NIC_PHYCR 0 |
| PHY control register. | |
| #define | PHYCR_RST 0x8000 |
| #define | PHYCR_LPBK 0x4000 |
| #define | PHYCR_SPEED 0x2000 |
| #define | PHYCR_ANEG_EN 0x1000 |
| #define | PHYCR_PDN 0x0800 |
| #define | PHYCR_MII_DIS 0x0400 |
| #define | PHYCR_ANEG_RST 0x0200 |
| #define | PHYCR_DPLX 0x0100 |
| #define | PHYCR_COLST 0x0080 |
| #define | NIC_PHYSR 1 |
| PHY status register. | |
| #define | PHYSR_CAP_T4 0x8000 |
| #define | PHYSR_CAP_TXF 0x4000 |
| #define | PHYSR_CAP_TXH 0x2000 |
| #define | PHYSR_CAP_TF 0x1000 |
| #define | PHYSR_CAP_TH 0x0800 |
| #define | PHYSR_CAP_SUPR 0x0040 |
| #define | PHYSR_ANEG_ACK 0x0020 |
| #define | PHYSR_REM_FLT 0x0010 |
| #define | PHYSR_CAP_ANEG 0x0008 |
| #define | PHYSR_LINK 0x0004 |
| #define | PHYSR_JAB 0x0002 |
| #define | PHYSR_EXREG 0x0001 |
| #define | NIC_PHYID1 2 |
| PHY identifier register 1. | |
| #define | NIC_PHYID2 3 |
| PHY identifier register 1. | |
| #define | NIC_PHYANAD 4 |
| PHY auto-negotiation advertisement register. | |
| #define | PHYANAD_NP 0x8000 |
| #define | PHYANAD_ACK 0x4000 |
| #define | PHYANAD_RF 0x2000 |
| #define | PHYANAD_T4 0x0200 |
| #define | PHYANAD_TX_FDX 0x0100 |
| #define | PHYANAD_TX_HDX 0x0080 |
| #define | PHYANAD_10FDX 0x0040 |
| #define | PHYANAD_10_HDX 0x0020 |
| #define | PHYANAD_CSMA 0x0001 |
| #define | NIC_PHYANRC 5 |
| PHY auto-negotiation remote end capability register. | |
| #define | NIC_PHYCFR1 16 |
| PHY configuration register 1. | |
| #define | NIC_PHYCFR2 17 |
| PHY configuration register 2. | |
| #define | NIC_PHYSOR 18 |
| PHY status output register. | |
| #define | PHYSOR_INT 0x8000 |
| #define | PHYSOR_LNKFAIL 0x4000 |
| #define | PHYSOR_LOSSSYNC 0x2000 |
| #define | PHYSOR_CWRD 0x1000 |
| #define | PHYSOR_SSD 0x0800 |
| #define | PHYSOR_ESD 0x0400 |
| #define | PHYSOR_RPOL 0x0200 |
| #define | PHYSOR_JAB 0x0100 |
| #define | PHYSOR_SPDDET 0x0080 |
| #define | PHYSOR_DPLXDET 0x0040 |
| #define | NIC_PHYMSK 19 |
| PHY mask register. | |
| #define | PHYMSK_MINT 0x8000 |
| #define | PHYMSK_MLNKFAIL 0x4000 |
| #define | PHYMSK_MLOSSSYN 0x2000 |
| #define | PHYMSK_MCWRD 0x1000 |
| #define | PHYMSK_MSSD 0x0800 |
| #define | PHYMSK_MESD 0x0400 |
| #define | PHYMSK_MRPOL 0x0200 |
| #define | PHYMSK_MJAB 0x0100 |
| #define | PHYMSK_MSPDDT 0x0080 |
| #define | PHYMSK_MDPLDT 0x0040 |
| #define CTR_AUTO_RELEASE 0x0800 |
| #define INT_ALLOC 0x08 |
| #define INT_EPH 0x20 |
| #define INT_RX_OVRN 0x10 |
| #define INT_TX_EMPTY 0x04 |
| #define MGMT_MCLK 0x04 |
| #define MGMT_MDI 0x02 |
| #define MGMT_MDOE 0x08 |
| #define NIC_ARR (LANC111_BASE_ADDR + 0x03) |
| #define NIC_PNR (LANC111_BASE_ADDR + 0x02) |
| #define PHYANAD_10_HDX 0x0020 |
NIC_PHYANAD bit mask, indicates 10BASE-T half duplex capability.
| #define PHYANAD_10FDX 0x0040 |
NIC_PHYANAD bit mask, indicates 10BASE-T full duplex capability.
| #define PHYANAD_ACK 0x4000 |
NIC_PHYANAD bit mask, acknowledged.
| #define PHYANAD_CSMA 0x0001 |
NIC_PHYANAD bit mask, indicates 802.3 CSMA capability.
| #define PHYANAD_NP 0x8000 |
NIC_PHYANAD bit mask, exchanging next page information.
| #define PHYANAD_RF 0x2000 |
NIC_PHYANAD bit mask, remote fault.
| #define PHYANAD_T4 0x0200 |
NIC_PHYANAD bit mask, indicates 100BASE-T4 capability.
| #define PHYANAD_TX_FDX 0x0100 |
NIC_PHYANAD bit mask, indicates 100BASE-TX full duplex capability.
| #define PHYANAD_TX_HDX 0x0080 |
NIC_PHYANAD bit mask, indicates 100BASE-TX half duplex capability.
| #define PHYMSK_MCWRD 0x1000 |
NIC_PHYMSK bit mask, enables PHYSOR_CWRD interrupt.
| #define PHYMSK_MDPLDT 0x0040 |
NIC_PHYMSK bit mask, enables PHYSOR_DPLXDET interrupt.
| #define PHYMSK_MESD 0x0400 |
NIC_PHYMSK bit mask, enables PHYSOR_ESD interrupt.
| #define PHYMSK_MINT 0x8000 |
NIC_PHYMSK bit mask, enables PHYSOR_INT interrupt.
| #define PHYMSK_MJAB 0x0100 |
NIC_PHYMSK bit mask, enables PHYSOR_JAB interrupt.
| #define PHYMSK_MLNKFAIL 0x4000 |
NIC_PHYMSK bit mask, enables PHYSOR_LNKFAIL interrupt.
| #define PHYMSK_MLOSSSYN 0x2000 |
NIC_PHYMSK bit mask, enables PHYSOR_LOSSSYNC interrupt.
| #define PHYMSK_MRPOL 0x0200 |
NIC_PHYMSK bit mask, enables PHYSOR_RPOL interrupt.
| #define PHYMSK_MSPDDT 0x0080 |
NIC_PHYMSK bit mask, enables PHYSOR_SPDDET interrupt.
| #define PHYMSK_MSSD 0x0800 |
NIC_PHYMSK bit mask, enables PHYSOR_SSD interrupt.
| #define PHYSOR_CWRD 0x1000 |
NIC_PHYSOR bit mask, code word error detected.
| #define PHYSOR_DPLXDET 0x0040 |
NIC_PHYSOR bit mask, duplex detected.
| #define PHYSOR_ESD 0x0400 |
NIC_PHYSOR bit mask, end of stream error detected.
| #define PHYSOR_INT 0x8000 |
NIC_PHYSOR bit mask, interrupt bits changed.
| #define PHYSOR_JAB 0x0100 |
NIC_PHYSOR bit mask, jabber detected.
| #define PHYSOR_LNKFAIL 0x4000 |
NIC_PHYSOR bit mask, link failure detected.
| #define PHYSOR_LOSSSYNC 0x2000 |
NIC_PHYSOR bit mask, descrambler sync lost detected.
| #define PHYSOR_RPOL 0x0200 |
NIC_PHYSOR bit mask, reverse polarity detected.
| #define PHYSOR_SPDDET 0x0080 |
NIC_PHYSOR bit mask, 100/10 speed detected.
| #define PHYSOR_SSD 0x0800 |
NIC_PHYSOR bit mask, start of stream error detected.
| #define PHYSR_ANEG_ACK 0x0020 |
| #define PHYSR_CAP_ANEG 0x0008 |
| #define PHYSR_CAP_SUPR 0x0040 |
| #define PHYSR_CAP_T4 0x8000 |
| #define PHYSR_CAP_TF 0x1000 |
| #define PHYSR_CAP_TH 0x0800 |
| #define PHYSR_CAP_TXF 0x4000 |
| #define PHYSR_CAP_TXH 0x2000 |
| #define PHYSR_EXREG 0x0001 |
| #define PHYSR_JAB 0x0002 |
| #define PHYSR_LINK 0x0004 |
| #define PHYSR_REM_FLT 0x0010 |
| #define RCR_ABORT_ENB 0x2000 |
| #define RCR_ALMUL 0x0004 |
| #define RCR_FILT_CAR 0x4000 |
| #define RCR_PRMS 0x0002 |
| #define RCR_RX_ABORT 0x0001 |
| #define RCR_RXEN 0x0100 |
| #define RCR_SOFT_RST 0x8000 |
| #define RCR_STRIP_CRC 0x0200 |
| #define RPCR_ANEG 0x0800 |
| #define RPCR_DPLX 0x1000 |
| #define RPCR_LEDA_PAT 0x0000 |
| #define RPCR_LEDB_PAT 0x0010 |
| #define RPCR_SPEED 0x2000 |
| #define TCR_EPH_LOOP 0x2000 |
| #define TCR_FDUPLX 0x0800 |
| #define TCR_FORCOL 0x0004 |
| #define TCR_LOOP 0x0002 |
| #define TCR_MON_CSN 0x0400 |
| #define TCR_NOCRC 0x0100 |
| #define TCR_PAD_EN 0x0080 |
| #define TCR_STP_SQET 0x1000 |
| #define TCR_SWFDUP 0x8000 |
1.7.3