This file contains the register definitions for the AT86RF230. More...

Defines
#define	RG_TRX_STATUS (0x01)
	Offset for register TRX_STATUS.
#define	SR_CCA_DONE 0x01, 0x80, 7
	Access parameters for sub-register CCA_DONE in register RG_TRX_STATUS.
#define	SR_CCA_STATUS 0x01, 0x40, 6
	Access parameters for sub-register CCA_STATUS in register RG_TRX_STATUS.
#define	SR_TRX_STATUS 0x01, 0x1f, 0
	Access parameters for sub-register TRX_STATUS in register RG_TRX_STATUS.
#define	P_ON (0)
	Constant P_ON for sub-register SR_TRX_STATUS.
#define	BUSY_RX (1)
	Constant BUSY_RX for sub-register SR_TRX_STATUS.
#define	BUSY_TX (2)
	Constant BUSY_TX for sub-register SR_TRX_STATUS.
#define	RX_ON (6)
	Constant RX_ON for sub-register SR_TRX_STATUS.
#define	TRX_OFF (8)
	Constant TRX_OFF for sub-register SR_TRX_STATUS.
#define	PLL_ON (9)
	Constant PLL_ON for sub-register SR_TRX_STATUS.
#define	SLEEP (15)
	Constant SLEEP for sub-register SR_TRX_STATUS.
#define	BUSY_RX_AACK (17)
	Constant BUSY_RX_AACK for sub-register SR_TRX_STATUS.
#define	BUSY_TX_ARET (18)
	Constant BUSY_TX_ARET for sub-register SR_TRX_STATUS.
#define	RX_AACK_ON (22)
	Constant RX_AACK_ON for sub-register SR_TRX_STATUS.
#define	TX_ARET_ON (25)
	Constant TX_ARET_ON for sub-register SR_TRX_STATUS.
#define	RX_ON_NOCLK (28)
	Constant RX_ON_NOCLK for sub-register SR_TRX_STATUS.
#define	RX_AACK_ON_NOCLK (29)
	Constant RX_AACK_ON_NOCLK for sub-register SR_TRX_STATUS.
#define	BUSY_RX_AACK_NOCLK (30)
	Constant BUSY_RX_AACK_NOCLK for sub-register SR_TRX_STATUS.
#define	RG_TRX_STATE (0x02)
	Offset for register TRX_STATE.
#define	SR_TRAC_STATUS 0x02, 0xe0, 5
	Access parameters for sub-register TRAC_STATUS in register RG_TRX_STATE.
#define	SR_TRX_CMD 0x02, 0x1f, 0
	Access parameters for sub-register TRX_CMD in register RG_TRX_STATE.
#define	CMD_NOP (0)
	Constant CMD_NOP for sub-register SR_TRX_CMD.
#define	CMD_TX_START (2)
	Constant CMD_TX_START for sub-register SR_TRX_CMD.
#define	CMD_FORCE_TRX_OFF (3)
	Constant CMD_FORCE_TRX_OFF for sub-register SR_TRX_CMD.
#define	CMD_RX_ON (6)
	Constant CMD_RX_ON for sub-register SR_TRX_CMD.
#define	CMD_TRX_OFF (8)
	Constant CMD_TRX_OFF for sub-register SR_TRX_CMD.
#define	CMD_PLL_ON (9)
	Constant CMD_PLL_ON for sub-register SR_TRX_CMD.
#define	CMD_RX_AACK_ON (22)
	Constant CMD_RX_AACK_ON for sub-register SR_TRX_CMD.
#define	CMD_TX_ARET_ON (25)
	Constant CMD_TX_ARET_ON for sub-register SR_TRX_CMD.
#define	RG_TRX_CTRL_0 (0x03)
	Offset for register TRX_CTRL_0.
#define	RG_TRX_CTRL_1 (0x04)
	Offset for register TRX_CTRL_1.
#define	SR_PAD_IO 0x03, 0xc0, 6
	Access parameters for sub-register PAD_IO in register RG_TRX_CTRL_0.
#define	SR_PAD_IO_CLKM 0x03, 0x30, 4
	Access parameters for sub-register PAD_IO_CLKM in register RG_TRX_CTRL_0.
#define	CLKM_2mA (0)
	Constant CLKM_2mA for sub-register SR_PAD_IO_CLKM.
#define	CLKM_4mA (1)
	Constant CLKM_4mA for sub-register SR_PAD_IO_CLKM.
#define	CLKM_6mA (2)
	Constant CLKM_6mA for sub-register SR_PAD_IO_CLKM.
#define	CLKM_8mA (3)
	Constant CLKM_8mA for sub-register SR_PAD_IO_CLKM.
#define	SR_CLKM_SHA_SEL 0x03, 0x08, 3
	Access parameters for sub-register CLKM_SHA_SEL in register RG_TRX_CTRL_0.
#define	SR_CLKM_CTRL 0x03, 0x07, 0
	Access parameters for sub-register CLKM_CTRL in register RG_TRX_CTRL_0.
#define	CLKM_no_clock (0)
	Constant CLKM_no_clock for sub-register SR_CLKM_CTRL.
#define	CLKM_1MHz (1)
	Constant CLKM_1MHz for sub-register SR_CLKM_CTRL.
#define	CLKM_2MHz (2)
	Constant CLKM_2MHz for sub-register SR_CLKM_CTRL.
#define	CLKM_4MHz (3)
	Constant CLKM_4MHz for sub-register SR_CLKM_CTRL.
#define	CLKM_8MHz (4)
	Constant CLKM_8MHz for sub-register SR_CLKM_CTRL.
#define	CLKM_16MHz (5)
	Constant CLKM_16MHz for sub-register SR_CLKM_CTRL.
#define	RG_PHY_TX_PWR (0x05)
	Offset for register PHY_TX_PWR.
#define	SR_TX_AUTO_CRC_ON 0x05, 0x80, 7
	Access parameters for sub-register TX_AUTO_CRC_ON in register RG_PHY_TX_PWR.
#define	SR_TX_PWR 0x05, 0x0f, 0
	Access parameters for sub-register TX_PWR in register RG_PHY_TX_PWR.
#define	RG_PHY_RSSI (0x06)
	Offset for register PHY_RSSI.
#define	SR_RSSI 0x06, 0x1f, 0
	Access parameters for sub-register RSSI in register RG_PHY_RSSI.
#define	RG_PHY_ED_LEVEL (0x07)
	Offset for register PHY_ED_LEVEL.
#define	SR_ED_LEVEL 0x07, 0xff, 0
	Access parameters for sub-register ED_LEVEL in register RG_PHY_ED_LEVEL.
#define	RG_PHY_CC_CCA (0x08)
	Offset for register PHY_CC_CCA.
#define	SR_CCA_REQUEST 0x08, 0x80, 7
	Access parameters for sub-register CCA_REQUEST in register RG_PHY_CC_CCA.
#define	SR_CCA_MODE 0x08, 0x60, 5
	Access parameters for sub-register CCA_MODE in register RG_PHY_CC_CCA.
#define	SR_CHANNEL 0x08, 0x1f, 0
	Access parameters for sub-register CHANNEL in register RG_PHY_CC_CCA.
#define	RG_CCA_THRES (0x09)
	Offset for register CCA_THRES.
#define	SR_CCA_CS_THRES 0x09, 0xf0, 4
	Access parameters for sub-register CCA_CS_THRES in register RG_CCA_THRES.
#define	SR_CCA_ED_THRES 0x09, 0x0f, 0
	Access parameters for sub-register CCA_ED_THRES in register RG_CCA_THRES.
#define	RG_IRQ_MASK (0x0e)
	Offset for register IRQ_MASK.
#define	SR_IRQ_MASK 0x0e, 0xff, 0
	Access parameters for sub-register IRQ_MASK in register RG_IRQ_MASK.
#define	RG_IRQ_STATUS (0x0f)
	Offset for register IRQ_STATUS.
#define	SR_IRQ_7_BAT_LOW 0x0f, 0x80, 7
	Access parameters for sub-register IRQ_7_BAT_LOW in register RG_IRQ_STATUS.
#define	SR_IRQ_6_TRX_UR 0x0f, 0x40, 6
	Access parameters for sub-register IRQ_6_TRX_UR in register RG_IRQ_STATUS.
#define	SR_IRQ_5 0x0f, 0x20, 5
	Access parameters for sub-register IRQ_5 in register RG_IRQ_STATUS.
#define	SR_IRQ_4 0x0f, 0x10, 4
	Access parameters for sub-register IRQ_4 in register RG_IRQ_STATUS.
#define	SR_IRQ_3_TRX_END 0x0f, 0x08, 3
	Access parameters for sub-register IRQ_3_TRX_END in register RG_IRQ_STATUS.
#define	SR_IRQ_2_RX_START 0x0f, 0x04, 2
	Access parameters for sub-register IRQ_2_RX_START in register RG_IRQ_STATUS.
#define	SR_IRQ_1_PLL_UNLOCK 0x0f, 0x02, 1
	Access parameters for sub-register IRQ_1_PLL_UNLOCK in register RG_IRQ_STATUS.
#define	SR_IRQ_0_PLL_LOCK 0x0f, 0x01, 0
	Access parameters for sub-register IRQ_0_PLL_LOCK in register RG_IRQ_STATUS.
#define	RG_VREG_CTRL (0x10)
	Offset for register VREG_CTRL.
#define	SR_AVREG_EXT 0x10, 0x80, 7
	Access parameters for sub-register AVREG_EXT in register RG_VREG_CTRL.
#define	SR_AVDD_OK 0x10, 0x40, 6
	Access parameters for sub-register AVDD_OK in register RG_VREG_CTRL.
#define	SR_AVREG_TRIM 0x10, 0x30, 4
	Access parameters for sub-register AVREG_TRIM in register RG_VREG_CTRL.
#define	AVREG_1_80V (0)
	Constant AVREG_1_80V for sub-register SR_AVREG_TRIM.
#define	AVREG_1_75V (1)
	Constant AVREG_1_75V for sub-register SR_AVREG_TRIM.
#define	AVREG_1_84V (2)
	Constant AVREG_1_84V for sub-register SR_AVREG_TRIM.
#define	AVREG_1_88V (3)
	Constant AVREG_1_88V for sub-register SR_AVREG_TRIM.
#define	SR_DVREG_EXT 0x10, 0x08, 3
	Access parameters for sub-register DVREG_EXT in register RG_VREG_CTRL.
#define	SR_DVDD_OK 0x10, 0x04, 2
	Access parameters for sub-register DVDD_OK in register RG_VREG_CTRL.
#define	SR_DVREG_TRIM 0x10, 0x03, 0
	Access parameters for sub-register DVREG_TRIM in register RG_VREG_CTRL.
#define	DVREG_1_80V (0)
	Constant DVREG_1_80V for sub-register SR_DVREG_TRIM.
#define	DVREG_1_75V (1)
	Constant DVREG_1_75V for sub-register SR_DVREG_TRIM.
#define	DVREG_1_84V (2)
	Constant DVREG_1_84V for sub-register SR_DVREG_TRIM.
#define	DVREG_1_88V (3)
	Constant DVREG_1_88V for sub-register SR_DVREG_TRIM.
#define	RG_BATMON (0x11)
	Offset for register BATMON.
#define	SR_BATMON_OK 0x11, 0x20, 5
	Access parameters for sub-register BATMON_OK in register RG_BATMON.
#define	SR_BATMON_HR 0x11, 0x10, 4
	Access parameters for sub-register BATMON_HR in register RG_BATMON.
#define	SR_BATMON_VTH 0x11, 0x0f, 0
	Access parameters for sub-register BATMON_VTH in register RG_BATMON.
#define	RG_XOSC_CTRL (0x12)
	Offset for register XOSC_CTRL.
#define	RG_RX_SYN 0x15
	Offset for register RX_SYN.
#define	RG_XAH_CTRL_1 0x17
	Offset for register XAH_CTRL_1.
#define	SR_XTAL_MODE 0x12, 0xf0, 4
	Access parameters for sub-register XTAL_MODE in register RG_XOSC_CTRL.
#define	SR_XTAL_TRIM 0x12, 0x0f, 0
	Access parameters for sub-register XTAL_TRIM in register RG_XOSC_CTRL.
#define	RG_FTN_CTRL (0x18)
	Offset for register FTN_CTRL.
#define	SR_FTN_START 0x18, 0x80, 7
	Access parameters for sub-register FTN_START in register RG_FTN_CTRL.
#define	SR_FTNV 0x18, 0x3f, 0
	Access parameters for sub-register FTNV in register RG_FTN_CTRL.
#define	RG_PLL_CF (0x1a)
	Offset for register PLL_CF.
#define	SR_PLL_CF_START 0x1a, 0x80, 7
	Access parameters for sub-register PLL_CF_START in register RG_PLL_CF.
#define	SR_PLL_CF 0x1a, 0x0f, 0
	Access parameters for sub-register PLL_CF in register RG_PLL_CF.
#define	RG_PLL_DCU (0x1b)
	Offset for register PLL_DCU.
#define	SR_PLL_DCU_START 0x1b, 0x80, 7
	Access parameters for sub-register PLL_DCU_START in register RG_PLL_DCU.
#define	SR_PLL_DCUW 0x1b, 0x3f, 0
	Access parameters for sub-register PLL_DCUW in register RG_PLL_DCU.
#define	RG_PART_NUM (0x1c)
	Offset for register PART_NUM.
#define	SR_PART_NUM 0x1c, 0xff, 0
	Access parameters for sub-register PART_NUM in register RG_PART_NUM.
#define	RF230 (2)
	Constant RF230 for sub-register SR_PART_NUM.
#define	RG_VERSION_NUM (0x1d)
	Offset for register VERSION_NUM.
#define	SR_VERSION_NUM 0x1d, 0xff, 0
	Access parameters for sub-register VERSION_NUM in register RG_VERSION_NUM.
#define	RG_MAN_ID_0 (0x1e)
	Offset for register MAN_ID_0.
#define	SR_MAN_ID_0 0x1e, 0xff, 0
	Access parameters for sub-register MAN_ID_0 in register RG_MAN_ID_0.
#define	RG_MAN_ID_1 (0x1f)
	Offset for register MAN_ID_1.
#define	SR_MAN_ID_1 0x1f, 0xff, 0
	Access parameters for sub-register MAN_ID_1 in register RG_MAN_ID_1.
#define	RG_SHORT_ADDR_0 (0x20)
	Offset for register SHORT_ADDR_0.
#define	SR_SHORT_ADDR_0 0x20, 0xff, 0
	Access parameters for sub-register SHORT_ADDR_0 in register RG_SHORT_ADDR_0.
#define	RG_SHORT_ADDR_1 (0x21)
	Offset for register SHORT_ADDR_1.
#define	SR_SHORT_ADDR_1 0x21, 0xff, 0
	Access parameters for sub-register SHORT_ADDR_1 in register RG_SHORT_ADDR_1.
#define	RG_PAN_ID_0 (0x22)
	Offset for register PAN_ID_0.
#define	SR_PAN_ID_0 0x22, 0xff, 0
	Access parameters for sub-register PAN_ID_0 in register RG_PAN_ID_0.
#define	RG_PAN_ID_1 (0x23)
	Offset for register PAN_ID_1.
#define	SR_PAN_ID_1 0x23, 0xff, 0
	Access parameters for sub-register PAN_ID_1 in register RG_PAN_ID_1.
#define	RG_IEEE_ADDR_0 (0x24)
	Offset for register IEEE_ADDR_0.
#define	SR_IEEE_ADDR_0 0x24, 0xff, 0
	Access parameters for sub-register IEEE_ADDR_0 in register RG_IEEE_ADDR_0.
#define	RG_IEEE_ADDR_1 (0x25)
	Offset for register IEEE_ADDR_1.
#define	SR_IEEE_ADDR_1 0x25, 0xff, 0
	Access parameters for sub-register IEEE_ADDR_1 in register RG_IEEE_ADDR_1.
#define	RG_IEEE_ADDR_2 (0x26)
	Offset for register IEEE_ADDR_2.
#define	SR_IEEE_ADDR_2 0x26, 0xff, 0
	Access parameters for sub-register IEEE_ADDR_2 in register RG_IEEE_ADDR_2.
#define	RG_IEEE_ADDR_3 (0x27)
	Offset for register IEEE_ADDR_3.
#define	SR_IEEE_ADDR_3 0x27, 0xff, 0
	Access parameters for sub-register IEEE_ADDR_3 in register RG_IEEE_ADDR_3.
#define	RG_IEEE_ADDR_4 (0x28)
	Offset for register IEEE_ADDR_4.
#define	SR_IEEE_ADDR_4 0x28, 0xff, 0
	Access parameters for sub-register IEEE_ADDR_4 in register RG_IEEE_ADDR_4.
#define	RG_IEEE_ADDR_5 (0x29)
	Offset for register IEEE_ADDR_5.
#define	SR_IEEE_ADDR_5 0x29, 0xff, 0
	Access parameters for sub-register IEEE_ADDR_5 in register RG_IEEE_ADDR_5.
#define	RG_IEEE_ADDR_6 (0x2a)
	Offset for register IEEE_ADDR_6.
#define	SR_IEEE_ADDR_6 0x2a, 0xff, 0
	Access parameters for sub-register IEEE_ADDR_6 in register RG_IEEE_ADDR_6.
#define	RG_IEEE_ADDR_7 (0x2b)
	Offset for register IEEE_ADDR_7.
#define	SR_IEEE_ADDR_7 0x2b, 0xff, 0
	Access parameters for sub-register IEEE_ADDR_7 in register RG_IEEE_ADDR_7.
#define	RG_XAH_CTRL_0 (0x2c)
	Offset for register XAH_CTRL.
#define	SR_MAX_FRAME_RETRIES 0x2c, 0xf0, 4
	Access parameters for sub-register MAX_FRAME_RETRIES in register RG_XAH_CTRL_0.
#define	SR_MAX_CSMA_RETRIES 0x2c, 0x0e, 1
	Access parameters for sub-register MAX_CSMA_RETRIES in register RG_XAH_CTRL_0.
#define	RG_CSMA_SEED_0 (0x2d)
	Offset for register CSMA_SEED_0.
#define	SR_CSMA_SEED_0 0x2d, 0xff, 0
	Access parameters for sub-register CSMA_SEED_0 in register RG_CSMA_SEED_0.
#define	RG_CSMA_SEED_1 (0x2e)
	Offset for register CSMA_SEED_1.
#define	RG_CSMA_BE 0x2f
	Offset for register CSMA_BE.
#define	SR_MIN_BE 0x2e, 0xc0, 6
	Access parameters for sub-register MIN_BE in register RG_CSMA_SEED_1.
#define	SR_I_AM_COORD 0x2e, 0x08, 3
	Access parameters for sub-register I_AM_COORD in register RG_CSMA_SEED_1.
#define	SR_CSMA_SEED_1 0x2e, 0x07, 0
	Access parameters for sub-register CSMA_SEED_1 in register RG_CSMA_SEED_1.

Detailed Description

This file contains the register definitions for the AT86RF230.

Id:: at86rf230_registermap.h,v 1.2 2008/10/14 18:37:28 c_oflynn Exp

Definition in file at86rf230_registermap.h.

at86rf230_registermap.h File Reference

Defines

Detailed Description