menu.c File Reference

This file operates the menu flow chart described in the readme notes. More...

#include <avr/eeprom.h>
#include <util/delay.h>
#include "menu.h"
#include "main.h"
#include "lcd.h"
#include "key.h"
#include "uart.h"
#include "sleep.h"
#include "temp.h"
#include "beep.h"

Go to the source code of this file.

Functions
void	dectoascii (uint8_t val, char *str)
	This function will convert decimal to ascii.
uint8_t *	signed_dectoascii (int16_t n, uint8_t *str)
	This will convert a signed decimal number to ASCII.
void	eeprom_init (void)
	This will check for DEBUG mode after power up.
void	menu_run_sleep (uint8_t *val)
	This will start a sleep operation.
void	menu_run_doze (uint8_t *val)
	This will start a sleep with wakes for temperature measurement and web requests.
void	menu_ping_request (uint8_t *val)
	This will setup a ping request command to the 1284p and reset the ping counter.
uint8_t	menu_send_ping (void)
	This will send the ping request to the 1284p via the serial port.
void	menu_stop_ping (void)
	This will stop the ping request.
void	menu_debug_mode (uint8_t *val)
	This will enable or disable the JTAG debug interface to allow for proper temperature sensor readings.
void	menu_read_temp (uint8_t *val)
	This will display the temperature in degrees F or C.
void	menu_display_temp (void)
	This will display the temperature in degrees F or C.
void	menu_clear_temp (void)
	This will clear the temperature displayed in the 4 digit LCD segments.
void	menu_prepare_temp (uint8_t *val)
	This will setup the current temperature for transfer to the ATmega1284p via a binary command transfer.
void	menu_stop_temp (void)
	This will stop the auto sending of temperature data.
Variables
uint16_t	ADC2_reading
	This will send the data via the serial port.

---

Detailed Description

This file operates the menu flow chart described in the readme notes.

This will create the proper commands needed to control the 1284p.

Author:

Mike Vidales mavida404@gmail.com

Definition in file menu.c.