Contiki 2.6
|
Routines to interface between Ethernet and 6LowPan. More...
#include "uip.h"
#include "uip_arp.h"
#include "net/rime.h"
#include "sicslowpan.h"
#include "sicslow_ethernet.h"
#include "zmac.h"
#include "frame.h"
#include "radio.h"
#include "rndis/rndis_protocol.h"
#include "rndis/rndis_task.h"
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include "net/uip-icmp6.h"
#include "net/uip-nd6.h"
Go to the source code of this file.
Defines | |
#define | DEBUG 0 |
#define | LSB(u16) (((uint8_t *)&(u16))[0]) |
Least significant byte of u16. | |
#define | MSB(u16) (((uint8_t *)&(u16))[1]) |
Most significant byte of u16. | |
#define | TRANSLATE_BIT_MASK (1<<2) |
Location of TRANSLATE (TR) bit in Ethernet address. | |
#define | LOCAL_BIT_MASK (1<<1) |
Location of LOCAL (GL) bit in Ethernet address. | |
#define | MULTICAST_BIT_MASK (1<<0) |
Location of MULTICAST (MU) bit in Ethernet address. | |
Functions | |
uint8_t | mac_createSicslowpanLongAddr (uint8_t *ethernet, uip_lladdr_t *lowpan) |
Create a 802.15.4 long address from a 802.3 address. | |
uint8_t | mac_createEthernetAddr (uint8_t *ethernet, uip_lladdr_t *lowpan) |
Create a 802.3 address from a 802.15.4 long address. | |
uint8_t | mac_createDefaultEthernetAddr (uint8_t *ethernet) |
Create a 802.3 address (default) | |
void | mac_ethhijack (const struct mac_driver *r) |
Process a received 6lowpan packet. | |
void | mac_ethernetToLowpan (uint8_t *ethHeader) |
Take a packet received over the ethernet link, and send it out over 802.15.4. | |
void | mac_LowpanToEthernet (void) |
Take a packet received over the 802.15.4 link, and send it out over ethernet, performing any translations needed. | |
int8_t | mac_translateIPLinkLayer (lltype_t target) |
Translate IP packet's possible link-layer addresses, passing the message to the appropriate higher level function for this packet (aka: ICMP) | |
void | slide (uint8_t *data, uint8_t length, int16_t slide) |
Slide the pointed to memory up a certain amount, growing/shrinking a buffer. | |
int8_t | mac_translateIcmpLinkLayer (lltype_t target) |
Translate the link-layer (L2) addresses in an ICMP packet. | |
void | mac_logTXtoEthernet (frame_create_params_t *p, frame_result_t *frame_result) |
Logs a sent 6lowpan frame. | |
void | mac_802154raw (const struct mac_driver *r) |
Process a received 6lowpan packet. | |
Variables | |
uint64_t | macLongAddr |
Our own long address. | |
struct mac_driver * | pmac |
Perform any setup needed. |
Routines to interface between Ethernet and 6LowPan.
Definition in file sicslow_ethernet.c.
void mac_802154raw | ( | const struct mac_driver * | r | ) |
Process a received 6lowpan packet.
r | The MAC layer |
The 6lowpan packet is put in packetbuf by the MAC. This routine passes it directly to the ethernet layer without decompressing.
Definition at line 1118 of file sicslow_ethernet.c.
Referenced by mac_ethhijack().
void mac_logTXtoEthernet | ( | frame_create_params_t * | p, |
frame_result_t * | frame_result | ||
) |
Logs a sent 6lowpan frame.
This routine passes a frame directly to the ethernet layer without decompressing.
Definition at line 1105 of file sicslow_ethernet.c.
References frame_result_t::frame, and frame_result_t::length.