Contiki 2.6

contiki-conf.h

Go to the documentation of this file.
00001 /*
00002  * Copyright (c) 2006, Technical University of Munich
00003  * All rights reserved.
00004  *
00005  * Redistribution and use in source and binary forms, with or without
00006  * modification, are permitted provided that the following conditions
00007  * are met:
00008  * 1. Redistributions of source code must retain the above copyright
00009  *    notice, this list of conditions and the following disclaimer.
00010  * 2. Redistributions in binary form must reproduce the above copyright
00011  *    notice, this list of conditions and the following disclaimer in the
00012  *    documentation and/or other materials provided with the distribution.
00013  * 3. Neither the name of the Institute nor the names of its contributors
00014  *    may be used to endorse or promote products derived from this software
00015  *    without specific prior written permission.
00016  *
00017  * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
00018  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00019  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
00020  * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
00021  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
00022  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
00023  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
00024  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
00025  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
00026  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
00027  * SUCH DAMAGE.
00028  *
00029  * This file is part of the Contiki operating system.
00030  *
00031  * @(#)$$
00032  */
00033 
00034 /**
00035  * \file
00036  *         Configuration for sample STK 501 Contiki kernel
00037  *
00038  * \author
00039  *         Simon Barner <barner@in.tum.de
00040  */
00041 
00042 #ifndef __CONTIKI_CONF_H__
00043 #define __CONTIKI_CONF_H__
00044 
00045 #include <stdint.h>
00046 
00047 //typedef int32_t s32_t;
00048 
00049 /*
00050  * MCU and clock rate
00051  */
00052  /* Platform name, type, and MCU clock rate */
00053 #define PLATFORM_NAME  "RCB"
00054 #define PLATFORM_TYPE  RCB_B
00055 #ifndef F_CPU
00056 #define F_CPU          8000000UL
00057 #endif
00058 
00059 /* The AVR tick interrupt usually is done with an 8 bit counter around 128 Hz.
00060  * 125 Hz needs slightly more overhead during the interrupt, as does a 32 bit
00061  * clock_time_t.
00062  */
00063 /* Clock ticks per second */
00064 #define CLOCK_CONF_SECOND 125
00065 #if 1
00066 /* 16 bit counter overflows every ~10 minutes */
00067 typedef unsigned short clock_time_t;
00068 #define CLOCK_LT(a,b)  ((signed short)((a)-(b)) < 0)
00069 #define INFINITE_TIME 0xffff
00070 #define RIME_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME INFINITE_TIME/CLOCK_CONF_SECOND /* Default uses 600 */
00071 #define COLLECT_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME INFINITE_TIME/CLOCK_CONF_SECOND /* Default uses 600 */
00072 #else
00073 typedef unsigned long clock_time_t;
00074 #define CLOCK_LT(a,b)  ((signed long)((a)-(b)) < 0)
00075 #define INFINITE_TIME 0xffffffff
00076 #endif
00077 /* These routines are not part of the contiki core but can be enabled in cpu/avr/clock.c */
00078 void clock_delay_msec(uint16_t howlong);
00079 void clock_adjust_ticks(clock_time_t howmany);
00080 
00081 /* COM port to be used for SLIP connection */
00082 #define SLIP_PORT RS232_PORT_0
00083 
00084 /* Pre-allocated memory for loadable modules heap space (in bytes)*/
00085 #define MMEM_CONF_SIZE 256
00086 
00087 /* Use the following address for code received via the codeprop
00088  * facility
00089  */
00090 #define EEPROMFS_ADDR_CODEPROP 0x8000
00091 
00092 #define CCIF
00093 #define CLIF
00094 
00095 //#define UIP_CONF_IPV6            1  //Let makefile determine this so ipv4 hello-world will compile
00096 
00097 #define RIMEADDR_CONF_SIZE       8
00098 #define PACKETBUF_CONF_HDR_SIZE    0
00099 
00100 /* 0 for IPv6, or 1 for HC1, 2 for HC01 */
00101 #define SICSLOWPAN_CONF_COMPRESSION_IPV6 0 
00102 #define SICSLOWPAN_CONF_COMPRESSION_HC1  1 
00103 #define SICSLOWPAN_CONF_COMPRESSION_HC01 2
00104 
00105 #define SICSLOWPAN_CONF_COMPRESSION       SICSLOWPAN_CONF_COMPRESSION_HC01 
00106 #define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2
00107 #define SICSLOWPAN_CONF_FRAG              1
00108 
00109 #define SICSLOWPAN_CONF_MAXAGE 5
00110 
00111 #define UIP_CONF_LL_802154       1
00112 #define UIP_CONF_LLH_LEN         0
00113 
00114 #define UIP_CONF_MAX_CONNECTIONS 2
00115 #define UIP_CONF_MAX_LISTENPORTS 2
00116 #define UIP_CONF_UDP_CONNS       2
00117 
00118 #define UIP_CONF_IP_FORWARD      0
00119 #define UIP_CONF_FWCACHE_SIZE    0
00120 
00121 #define UIP_CONF_IPV6_CHECKS     1
00122 #define UIP_CONF_IPV6_QUEUE_PKT  0
00123 #define UIP_CONF_IPV6_REASSEMBLY 0
00124 #define UIP_CONF_NETIF_MAX_ADDRESSES  3
00125 #define UIP_CONF_ND6_MAX_PREFIXES     3
00126 #define UIP_CONF_ND6_MAX_NEIGHBORS    4  
00127 #define UIP_CONF_ND6_MAX_DEFROUTERS   2
00128 #if UIP_CONF_IPV6                       //tcpip.c error on ipv4 build if UIP_CONF_ICMP6 defined
00129 #define UIP_CONF_ICMP6           1
00130 #endif
00131 
00132 #define UIP_CONF_UDP             1
00133 #define UIP_CONF_UDP_CHECKSUMS   1
00134 
00135 #define UIP_CONF_TCP             0
00136 #define UIP_CONF_TCP_SPLIT       0
00137 
00138 
00139 
00140 /* These names are deprecated, use C99 names. */
00141 /*typedef unsigned char u8_t;
00142 typedef unsigned short u16_t;
00143 typedef unsigned long u32_t;
00144 */
00145 typedef unsigned short uip_stats_t;
00146 typedef unsigned long off_t;
00147 
00148 #endif /* __CONTIKI_CONF_H__ */